Geyser repair: We provide all kind of geyser related solution like Geyser low water pressure, Geyser heating issue services, Water leakage fixing, Geyser power issue.
Geyser servicing: We provide all company and all types of geyser servicing Geyser cleaning services, Faster Heating & Electricity Savings, Removal of Scaling.
Geyser Installation & Uninstallation: Kaam Ke Bande provide all brand Geyser Installation & Uninstallation services.
✅ Geyser repair services in Chandigarh & Nearby
Are you searching Geyser repair & installation services for home services in Chandigarh? Get Geyser repair services near you in 45 minutes for all over Chandigarh. Kaam Ke Bande will help you in taking away the pain of finding the trusted Geyser repair services to cater to your needs right at the comfort at your home with affordable rates. Our Geyser repair services are highly skilled and prompt with undertaking their projects.
Review this Service
Frequently Asked Questions
Does geyser require servicing?
Yes It Does Require at least once a year. Unfortunately, with regular use, the appliances wear out, and you have to purchase new ones. But you don't need to run out and replace it right away, and it could just require some maintenance. Knowing the warning signs on your geyser could save you a lot of money in the long run.
TOP 5 SIGNS FOR A GEYSER SERVICE
1. No Hot Water coming out or taking much time to heat.
2. If It Leaks. It Could be a water leakage or current leakage.
3. Strange Sounds coming out. It normally sounds while heating But if you are getting louder strange sound it could be an error.
4. Rusty Water
How do you maintain a geyser?
It happens when you least expect it. The day your geyser decides that it's had enough. In fact, Santam's claims figures show that geysers mostly tend to give our policyholders problems on a Monday.
When your geyser bursts, you're also more than likely to find out if you have the right insurance cover.
They say prevention is better than cure, which is why Santam's Risk Management team put together these handy tips for you to check when maintaining your geyser:
Insulate your geyser with a geyser blanket. This prevents heat loss, reducing the cost of electricity needed to keep water hot.
The ideal geyser thermostat temperature should be set between 50 – 60 degrees Celsius. This will save some money on your electricity bill.
Check that the electrical isolator switch is within 1 meter of the geyser. This was not a requirement on old geysers. The geyser also has to be earthed.
Check that you have a drip tray and that it can safely drain away any leaks from a burst geyser. This will save you a lot of discomfort from having to claim for water damage.
There should be a cover over the thermostat and element. These are often just left lying next to the geyser.
Maintain your geyser by replacing the self-sacrificing anode. Anode rods come installed with geysers and are generally made of magnesium or aluminium which are screwed into the inside of the geyser. This anode, or rod, prevents corrosion of the geyser by "self-sacrificing" its metal which attracts the corrosion of the water and its minerals preventing corrosion of the tank. Therefore, you can save money by maintaining your geyser with a replacement anode.
Check that you have the appropriate plumbing piping. The geyser may be fed with a plastic pipe, up to the shut off valve, but the pipe into and out of the geyser must be copper or galvanised steel.
Finally, we recommend that you ask a plumber to check that your geyser has all of the important safety features, such as the vacuum breakers, shut off valve, temperature and pressure safety valve and the multi (pressure) valve. These are important safety features of the whole water heating system.
Here's to being a little more prepared for those unexpected days.
What is routine maintenance on a water heater?
Always maintain 2 feet of clearance around the appliance unless the manual specifically states otherwise. Drain about a quarter of the tank a few times a year to remove sediment and debris. Turn off the cold water supply, hook up a garden hose to the drain valve, then run into a bucket until the water is clear.
What should I check before buying a geyser?
While selecting a geyser look for important features like:
Automatic thermal cut-out.
Adjustable thermostat settings.
Safety valve for pressure release.
Glass coated heating element.
Rust proof outer body and so on.
How often should a geyser be serviced?
Most homeowners should flush their water heaters every six months or so, but if you have extremely hard water, you may want to do it more often. Flushing your hot water heater could be necessary as often as every few months depending on the mineral content of your local water supply
When should a geyser be replaced?
Most geysers have a limited life span of 10 to 12 years, while they can last that long it is generally not intended to be used beyond that
How much does water heater maintenance cost?
The cost of water heater maintenance ranges from $75 to $300+, depending on the following factors: What the plumber checks during a maintenance visit. Whether you choose a single visit or an annual maintenance plan. The overall quality of the plumber.
Which geyser is best for 4 member family?
Bajaj New Shakti.
V Guard Victo.
AO Smith Green.
Faber FWG Vulcan.
Crompton Arno Neo.
Bajaj Immersion Rod.
Panasonic Duro Digi.
What happens if you don't flush your water heater?
If not regularly flushed, your water heater can corrode more quickly. The sediment can also block or clog the pressure and relief valve (which helps keep your water heater from exploding)
How long do hot water heaters last?
Typically a residential hot water heater lasts between 6 and 13 years.
Does geyser consume more electricity?
Your geyser accounts for 40 to 60 percent of your electricity bill. The implication is that geyser is the most energy consuming of all your home appliances.
How many units does a geyser use per day?
Geyser Electricity Consumption Test
Max. Power drawn 3836W
Average energy used per day 9.24kWh
Total energy consumed in 4 days 36.97kWh
Is it bad to switch geyser on and off?
While electricity provider Eskom has encouraged people to switch off their electric geysers overnight in order to save electricity, plumbers warn that leaving them off could damage the hot water pipes and even cause the geyser to burst.
How can I reduce the power consumption of my geyser?
Geyser Use: How to Reduce Energy Consumption and Save
Insulate your geyser. Each day, a small amount of heat dissipates into your electric geyser's surrounds, which results in gradual cooling. ...
Turn down your geyser's thermostat. ...
Only use what's needed. ...
Change your showerhead.
About Geyser repair services
Why get Geyser repair services from Kaam Ke Bande?
- Doorstep repair: Kaam Ke Bande provide doorstep geyser repair services within 45 minutes.
- Verified Geyser repair services: Kaam Ke Bande provide background verified licensed & trained Geyser repair services.
- Service guarantee: Kaam Ke Bande provide one week service guarantee.
- Affordable rates: Kaam Ke Bande provide affordable rates even a minor work.
- Expertise: We have the expertise in Geyser repair,Installation & Uninstallation services with perfection.
Types Of Geyser Problems We Solve
- Geyser repair: Faulty geyser are risky we can’t avoid. Get best Geyser repair services in Chandigarh get your home/office rewire at affordable rates.
- Installation Service: Get geyser installation at your home/office in Chandigarh Kaam Ke Bande hare for you.
- Uninstallation: If you are moving or replacing your geyser, a technician can uninstall it for you.
- Maintenance: This includes tasks such as cleaning the tank, inspecting the wiring, and replacing the anode rod.
- Service Areas: We provide Geyser repair services for residential spaces, industrial and manufacturing units and other commercial establishments.
- Dripping overflow: This is a common problem with geysers, and it can be caused by a number of things, such as a faulty thermostat, a clogged overflow pipe, or a leak in the tank.
- Overheating: This can be a dangerous problem, as it can lead to the geyser bursting. It is usually caused by a faulty thermostat or a build-up of limescale in the tank.
- No hot water: This is a frustrating problem, but it is usually easy to fix. The most common causes are a faulty heating element, a tripped circuit breaker, or a blocked dip tube.
- Water leaking from the top: This can be caused by a number of things, such as a faulty seal, a cracked tank, or a loose connection.
- Poor water pressure: This can be caused by a number of things, such as a clogged filter, a restricted inlet valve, or a faulty pump.
” A geyser is fitted into the bathroom of most Indian homes for bathing and washing purposes. Now-a-days, geysers work on electricity, gas as well as renewable energy sources like solar energy. These devices may be equipped with advanced technology with features like anti-bacterial filters, energy saving solutions, high-safety solutions and remote control operation. Some local Geyser repair services even through there are a number of Geyser repair companies in Chandigarh charge very high for some short issues and also for the products they use and then take a long time to visit the site. If you don’t want to get into hassle of searching for Geyser repair services in the local market of the city. Kaam Ke Bande will provide you the best Geyser repair services in Chandigarh at you doorstep without any hassle.
Tips to avoid geyser repair services:
- Proper maintenance: Regular maintenance of your geyser can help to prevent major repairs down the road.
- Use soft water: Hard water can build up scale on the elements of your geyser, which can reduce efficiency and lead to premature failure. If you have hard water, you can install a water softener to help prevent this.
- Don’t run the geyser empty: If you run the geyser without any water in the tank, it can damage the elements. Always make sure that there is enough water in the tank before turning on the geyser.
- Set the temperature correctly: Overheating the water can also damage the elements of your geyser. Set the temperature to the lowest setting that you need, and only turn it up higher when you need hot water.
- Get a professional KKB Technician: If you notice any problems with your geyser, such as leaks, strange noises, or a loss of hot water, it’s important to have it inspected by a professional. Here KKB can identify and fix any problems before they lead to a major repair.
What you get from Here-
Occasional extra costs
We won’t charge you for
There are no reviews yet. Be the first one to write one.